How many watts does a well pump (1/2 HP) use?

A well pump (1/2 HP) is rated 851 W on the nameplate, the median of 4 sampled models. Champion's generator chart lists 750 to 1,000 W running. Sizing uses 2,000 W to start: the top of Champion's starting band, as no maker prints one. The smallest size that covers it alone is 3,500 W.

Well pump (1/2 HP) figures

Well pump (1/2 HP): draw, starting watts and amps Checked on
Figure Value Where it comes from
Rated draw (nameplate) 851 W Median of 4 sampled models: printed watts, or printed amps x 240 V. A nameplate figure is a maximum rating.
Typical running (generator maker's chart) 750 to 1,000 W Champion generator wattage chart
Starting (generator maker's chart) 1,500 to 2,000 W Champion generator wattage chart
Inrush (LRA x 240 V) 7,728 W Highest locked rotor amps on the sampled sheets times the voltage. A split-second stalled-rotor figure; not used for sizing.
Starting watts for sizing 2,000 W Used because no sampled maker prints a surge, so it is the top of Champion's starting band.
Amps at 240 V 3.5 A Rated draw divided by 240 V.

What was sampled: 1/2 HP 4 inch submersible well pump motor, 230 V, 2-wire and 3-wire.

The models we sampled

Each row is one real model and the figure its maker prints. Computed watts are printed watts, or printed amps times 240 V when the maker prints amps only.

Well pump (1/2 HP) models sampled Checked on
Printed as, document, checked
Franklin Electric 244505 5 670 32.2 670 Full Load Watts, fele.widen.net, checked
Franklin Electric 214505 5 670 23 670 Full Load Watts, fele.widen.net, checked
Pentek (Pentair) P42B0005A2-01 4.3 not published 16 1,032 FULL LOAD AMPS, pentair.com, checked
Pentek (Pentair) P43B0005A2-01 5.7 not published 20.5 1,368 FULL LOAD AMPS, pentair.com, checked

The generator you need

The smallest listed size that covers 851 W running and 2,000 W starting on its own is 3,500 W. It runs on 240 V, so the generator needs a 240 V outlet.

The smallest current generators in our data that run it alone:

Add it to the calculator with other appliances

Will a 2,000 to 7,500 watt generator run it?

Each size is treated as its own running watts, with a starting figure from the median surge of current generators that size. Each question links to the full list for that size.

Well pump (1/2 HP) on four generator sizes
Question Generator running W Generator starting W Answer
Will a 2,000 watt generator run a well pump (1/2 HP)? 2,000 2,545 No, needs a 240 V outlet
Will a 3,500 watt generator run a well pump (1/2 HP)? 3,500 4,375 Yes, with a 240 V outlet
Will a 5,000 watt generator run a well pump (1/2 HP)? 5,000 5,500 Yes, with a 240 V outlet
Will a 7,500 watt generator run a well pump (1/2 HP)? 7,500 9,388 Yes, with a 240 V outlet

With other appliances on a 3,500 W generator

Each row adds one more appliance. On this page a 3,500 W generator supplies 3,500 W running and 4,375 W starting.

Well pump (1/2 HP) with other appliances on a 3,500 W generator
Running at once Running total W Peak at the largest start W Runs
Well pump (1/2 HP) 851 2,000 Yes, with a 240 V outlet
Well pump (1/2 HP) + LED lights 860 2,009 Yes, with a 240 V outlet
Well pump (1/2 HP) + LED lights + phone charger 880 2,029 Yes, with a 240 V outlet
Well pump (1/2 HP) + LED lights + phone charger + TV 1,099 2,248 Yes, with a 240 V outlet
Well pump (1/2 HP) + LED lights + phone charger + TV + refrigerator 1,879 3,028 Yes, with a 240 V outlet

Every appliance on one chart

Sources

Where each Well pump (1/2 HP) value comes from
Spec Value Printed as Document Checked
Franklin Electric 244505: rated amps 5 A Full Load Amps fele.widen.net (owners manual pdf)
Franklin Electric 244505: rated watts 670 W Full Load Watts fele.widen.net (owners manual pdf)
Franklin Electric 244505: locked rotor amps 32.2 A Locked Rotor Amps fele.widen.net (owners manual pdf)
Franklin Electric 214505: rated amps 5 A Full Load Amps fele.widen.net (owners manual pdf)
Franklin Electric 214505: rated watts 670 W Full Load Watts fele.widen.net (owners manual pdf)
Franklin Electric 214505: locked rotor amps 23 A Locked Rotor Amps fele.widen.net (owners manual pdf)
Pentek (Pentair) P42B0005A2-01: rated amps 4.3 A FULL LOAD AMPS pentair.com (spec sheet pdf)
Pentek (Pentair) P42B0005A2-01: locked rotor amps 16 A LOCKED ROTOR AMPS pentair.com (spec sheet pdf)
Pentek (Pentair) P43B0005A2-01: rated amps 5.7 A FULL LOAD AMPS pentair.com (spec sheet pdf)
Pentek (Pentair) P43B0005A2-01: locked rotor amps 20.5 A LOCKED ROTOR AMPS pentair.com (spec sheet pdf)

Questions people ask

How many watts does a well pump (1/2 HP) use?

The 4 models we sampled print a median of 851 W on the nameplate. A nameplate figure is the maximum the maker rates, not the average while running. The Champion generator chart lists 750 to 1,000 W as typical running watts. Plan for 2,000 W when it starts.

How many amps does a well pump (1/2 HP) draw?

At 240 V, 851 W works out to 3.5 A. That is the median nameplate draw divided by 240 V. A well pump (1/2 HP) draws from a 240 V circuit, so a generator needs a 240 V outlet to run it. Locked rotor amps put the split-second inrush near 7,728 W, a figure not used for sizing.

What size generator does a well pump (1/2 HP) need?

The smallest listed size that covers a well pump (1/2 HP) on its own is 3,500 W. That covers 851 W running and 2,000 W starting. Anything else running at once adds to that. The smallest current generator in our data that runs it alone is the Predator 4375 Portable Generator at 3,500 W running.

How many watts does a well pump (1/2 HP) need to start?

We size a well pump (1/2 HP) at 2,000 W to start, because no sampled maker prints a surge, so it is the top of Champion's starting band. A generator has to cover that starting figure for a moment and the running figure after. Motors draw far more for the first second than once running.

Page data checked on