Predator 5000 Dual-Fuel Super Quiet Inverter Generator
Predator, Dual fuel inverter
- Running
- 3,900 W
- Starting
- 5,000 W
- Weight
- 110 lb
A MIG welder (140 A, 120 V) is rated 2,400 W on the nameplate, the median of 4 sampled models. Champion's generator chart lists 1,800 to 2,500 W running. Sizing uses 5,000 W to start: the top of Champion's starting band, as no maker prints one. The smallest size that covers it alone is 4,000 W.
| Figure | Value | Where it comes from |
|---|---|---|
| Rated draw (nameplate) | 2,400 W | Median of 4 sampled models: printed watts, or printed amps x 120 V. A nameplate figure is a maximum rating. |
| Typical running (generator maker's chart) | 1,800 to 2,500 W | Champion generator wattage chart |
| Starting (generator maker's chart) | 3,600 to 5,000 W | Champion generator wattage chart |
| Starting watts for sizing | 5,000 W | Used because no sampled maker prints a surge, so it is the top of Champion's starting band. |
| Amps at 120 V | 20 A | Rated draw divided by 120 V. |
What was sampled: 140 A class 120 V MIG and flux-core wire feed welder, input amps at rated output.
Each row is one real model and the figure its maker prints. Computed watts are printed watts, or printed amps times 120 V when the maker prints amps only.
| Printed as, document, checked | |||||
|---|---|---|---|---|---|
| Lincoln Electric | Easy-MIG 140 (K2697-1) | 20 | not published | 2,400 | Input Current at Rated Output, ch-delivery.lincolnelectric.com, checked |
| Lincoln Electric | Weld-Pak 140HD (K2514-1) | 20 | not published | 2,400 | Input Current, lincolnelectric.com, checked |
| Miller | Millermatic 142 (907838) | 19.3 | not published | 2,316 | AMPS INPUT AT RATED OUTPUT, 50/60 HZ, contenthub.itwwelding.com, checked |
| Hobart | Handler 140EZ (500582) | 20 | not published | 2,400 | Amps Input at Rated Output, 60 Hz, contenthub.itwwelding.com, checked |
The smallest listed size that covers 2,400 W running and 5,000 W starting on its own is 4,000 W.
The smallest current generators in our data that run it alone:
Predator, Dual fuel inverter
Predator, Dual fuel inverter
Westinghouse Outdoor Power Equipment, Inverter
Each size is treated as its own running watts, with a starting figure from the median surge of current generators that size. Each question links to the full list for that size.
| Question | Generator running W | Generator starting W | Answer |
|---|---|---|---|
| Will a 2,000 watt generator run a MIG welder (140 A, 120 V)? | 2,000 | 2,545 | No, too many running watts |
| Will a 3,500 watt generator run a MIG welder (140 A, 120 V)? | 3,500 | 4,375 | No, cannot start it |
| Will a 5,000 watt generator run a MIG welder (140 A, 120 V)? | 5,000 | 5,500 | Yes |
| Will a 7,500 watt generator run a MIG welder (140 A, 120 V)? | 7,500 | 9,388 | Yes |
Each row adds one more appliance. On this page a 3,500 W generator supplies 3,500 W running and 4,375 W starting.
| Running at once | Running total W | Peak at the largest start W | Runs |
|---|---|---|---|
| MIG welder (140 A, 120 V) | 2,400 | 5,000 | No, cannot start it |
| MIG welder (140 A, 120 V) + LED lights | 2,409 | 5,009 | No, cannot start it |
| MIG welder (140 A, 120 V) + LED lights + phone charger | 2,429 | 5,029 | No, cannot start it |
| MIG welder (140 A, 120 V) + LED lights + phone charger + TV | 2,648 | 5,248 | No, cannot start it |
| MIG welder (140 A, 120 V) + LED lights + phone charger + TV + refrigerator | 3,428 | 6,028 | No, cannot start it |
1,338 W running 7,500 W starting
1,800 W running 3,600 W starting
1,800 W running 6,000 W starting
| Spec | Value | Printed as | Document | Checked |
|---|---|---|---|---|
| Lincoln Electric Easy-MIG 140 (K2697-1): rated amps | 20 A | Input Current at Rated Output | ch-delivery.lincolnelectric.com (spec sheet pdf) | |
| Lincoln Electric Weld-Pak 140HD (K2514-1): rated amps | 20 A | Input Current | lincolnelectric.com (product page html) | |
| Miller Millermatic 142 (907838): rated amps | 19.3 A | AMPS INPUT AT RATED OUTPUT, 50/60 HZ | contenthub.itwwelding.com (spec sheet pdf) | |
| Hobart Handler 140EZ (500582): rated amps | 20 A | Amps Input at Rated Output, 60 Hz | contenthub.itwwelding.com (spec sheet pdf) |
The 4 models we sampled print a median of 2,400 W on the nameplate. A nameplate figure is the maximum the maker rates, not the average while running. The Champion generator chart lists 1,800 to 2,500 W as typical running watts. Plan for 5,000 W when it starts.
At 120 V, 2,400 W works out to 20 A. That is the median nameplate draw divided by 120 V. A MIG welder (140 A, 120 V) draws from an ordinary 120 V outlet. A breaker size printed on a spec sheet is the circuit it needs, not the appliance draw.
The smallest listed size that covers a MIG welder (140 A, 120 V) on its own is 4,000 W. That covers 2,400 W running and 5,000 W starting. Anything else running at once adds to that. The smallest current generator in our data that runs it alone is the Predator 5000 Dual-Fuel Super Quiet Inverter Generator at 3,900 W running.
We size a MIG welder (140 A, 120 V) at 5,000 W to start, because no sampled maker prints a surge, so it is the top of Champion's starting band. A generator has to cover that starting figure for a moment and the running figure after. Motors draw far more for the first second than once running.