How many watts does a table saw (10 inch) use?

A table saw (10 inch) is rated 1,800 W on the nameplate, the median of 4 sampled models. Champion's generator chart lists 1,800 to 3,000 W running. Sizing uses 6,000 W to start: the top of Champion's starting band, as no maker prints one. The smallest size that covers it alone is 5,500 W.

Table saw (10 inch) figures

Table saw (10 inch): draw, starting watts and amps Checked on
Figure Value Where it comes from
Rated draw (nameplate) 1,800 W Median of 4 sampled models: printed watts, or printed amps x 120 V. A nameplate figure is a maximum rating.
Typical running (generator maker's chart) 1,800 to 3,000 W Champion generator wattage chart
Starting (generator maker's chart) 3,600 to 6,000 W Champion generator wattage chart
Starting watts for sizing 6,000 W Used because no sampled maker prints a surge, so it is the top of Champion's starting band.
Amps at 120 V 15 A Rated draw divided by 120 V.

What was sampled: 10 inch jobsite table saw, 120 V, 15 A universal motor.

The models we sampled

Each row is one real model and the figure its maker prints. Computed watts are printed watts, or printed amps times 120 V when the maker prints amps only.

Table saw (10 inch) models sampled Checked on
Printed as, document, checked
DeWalt DWE7491RS 15 not published 1,800 Amperes, assets.dewalt.com, checked
SKIL TS6307-00 15 not published 1,800 Rated Input, skil.com, checked
Bosch 4100XC-10 15 not published 1,800 Amperage, ocsmedia.boschtools.com, checked
Bosch GTS15-10 15 not published 1,800 Amperage, boschtools.com, checked

The generator you need

The smallest listed size that covers 1,800 W running and 6,000 W starting on its own is 5,500 W.

The smallest current generators in our data that run it alone:

Add it to the calculator with other appliances

Will a 2,000 to 7,500 watt generator run it?

Each size is treated as its own running watts, with a starting figure from the median surge of current generators that size. Each question links to the full list for that size.

Table saw (10 inch) on four generator sizes
Question Generator running W Generator starting W Answer
Will a 2,000 watt generator run a table saw (10 inch)? 2,000 2,545 No, cannot start it
Will a 3,500 watt generator run a table saw (10 inch)? 3,500 4,375 No, cannot start it
Will a 5,000 watt generator run a table saw (10 inch)? 5,000 5,500 No, cannot start it
Will a 7,500 watt generator run a table saw (10 inch)? 7,500 9,388 Yes

With other appliances on a 3,500 W generator

Each row adds one more appliance. On this page a 3,500 W generator supplies 3,500 W running and 4,375 W starting.

Table saw (10 inch) with other appliances on a 3,500 W generator
Running at once Running total W Peak at the largest start W Runs
Table saw (10 inch) 1,800 6,000 No, cannot start it
Table saw (10 inch) + LED lights 1,809 6,009 No, cannot start it
Table saw (10 inch) + LED lights + phone charger 1,829 6,029 No, cannot start it
Table saw (10 inch) + LED lights + phone charger + TV 2,048 6,248 No, cannot start it
Table saw (10 inch) + LED lights + phone charger + TV + refrigerator 2,828 7,028 No, cannot start it

Every appliance on one chart

Sources

Where each Table saw (10 inch) value comes from
Spec Value Printed as Document Checked
DeWalt DWE7491RS: rated amps 15 A Amperes assets.dewalt.com (owners manual pdf)
SKIL TS6307-00: rated amps 15 A Rated Input skil.com (owners manual pdf)
Bosch 4100XC-10: rated amps 15 A Amperage ocsmedia.boschtools.com (owners manual pdf)
Bosch GTS15-10: rated amps 15 A Amperage boschtools.com (product page html)

Questions people ask

How many watts does a table saw (10 inch) use?

The 4 models we sampled print a median of 1,800 W on the nameplate. A nameplate figure is the maximum the maker rates, not the average while running. The Champion generator chart lists 1,800 to 3,000 W as typical running watts. Plan for 6,000 W when it starts.

How many amps does a table saw (10 inch) draw?

At 120 V, 1,800 W works out to 15 A. That is the median nameplate draw divided by 120 V. A table saw (10 inch) draws from an ordinary 120 V outlet. A breaker size printed on a spec sheet is the circuit it needs, not the appliance draw.

What size generator does a table saw (10 inch) need?

The smallest listed size that covers a table saw (10 inch) on its own is 5,500 W. That covers 1,800 W running and 6,000 W starting. Anything else running at once adds to that. The smallest current generator in our data that runs it alone is the Champion 6500W Dual Fuel Inverter 201532 at 5,250 W running.

How many watts does a table saw (10 inch) need to start?

We size a table saw (10 inch) at 6,000 W to start, because no sampled maker prints a surge, so it is the top of Champion's starting band. A generator has to cover that starting figure for a moment and the running figure after. Motors draw far more for the first second than once running.

Page data checked on